 |
 |
|
Smooth-Cast 300 Kit Smooth-Cast™ 300 is Nanric's top pick for positive mold making of the equine hoof in conjunction with our Advanced Cushion Support.  The Smooth-Cast™ 300 Series of liquid plastics are ultra-low viscosity casting resins that yield castings that are bright white and virtually bubble free. Vacuum degassing is not necessary. They offer the convenience of a one to one mix ratio (one part A to one part B by volume). The differences between them are pot life and demold time. These resins readily accept fillers (such as URE-FIL 3 from Smooth-On) and can be pigmented (Smooth-Cast 325 accepts pigments better than the SC 300 series). Fully cured castings are tough, durable, machinable and paintable. They resist moisture and mild solvents. Applications for Smooth-Cast Liquid Plastics also include reproducing small to medium size sculptures, cold cast bronze castings, making prototype models, roto cast pieces, special effect props and decorative jewelry. 
Try these related products: E-mail a friend about this item. |
 |
|